Approaching the Modernization of Manufacturing (Authentise Weekly News-In-Review – Week 48)

Upgrading to better standards and technologies is becoming easier than ever thanks to their decentralized and scalable nature, giving the opportunity to improve by gradual implementation and testing. There are many avenues of experimentation to consider. IIoT applications can be implemented as small, self-contained units, providing their own power and relaying sensible information where the most valuable data is to be found with a very small investment. Incorporating AM capabilities allows businesses to underpin numerous steps of traditional part production and logistics, assessing ROI that is clear from the start. However, the right software can sometimes be enough to jumpstart operational efficiency immensely, by automating and analyzing machine data with little effort and investment. Authentise very recently started integration of SLM machines data into its 3Diax platform. The digital age of manufacturing enables future-oriented actions to be taken at any business leisure.

Powering The IIoT With Industrial Grade Solar/Li-Ion Hybrids

[Small photovoltaic (PV panels) in combination with Lithium-ion (Li-ion) batteries], two well-proven and synergistic technologies are providing highly cost-effective solutions for both consumer and industrial grade applications, including many connected to the IoT and the IIoT. All sorts of industrial applications are currently deploying PV/Li-ion battery hybrid technology, including GPS sensors and asset trackers, environmental monitoring systems, smart agriculture (monitoring moisture, temperature, and rainfall), marine buoys, and many other M2M and systems control and data automation (SCADA) applications.

Read the full article at Sensors Online.

Sembcorp Marine To Apply AM In Shipbuilding Revolution

A LAAM made part on display at the Sembcorp Marine MOU signing. Photo via A*STAR

Sembcorp Marine is seeking to revolutionize the offshore & marine (O&M) sector by adding cutting-edge technologies to its shipbuilding and repair efforts. In collaboration with three partners across industry and the Singapore government, the company will develop water-tight production applications with a Digital TwinAM and drone assistance.

Read the full article here.

SLM Solutions: Cooperation agreement signed with Authentise Inc.

SLM Solutions Group AG , a leading supplier of metal-based additive manufacturing technology, has recently signed a cooperation agreement with Authentise Inc. Software developed by Authentise helps SLM Solutions customers expand additive manufacturing capacities through greater efficiency, transparency and quality in deploying SLM machines.

Read the full press release here.

 

If you wish to be kept updated on a daily basis on movements in the AM/IIoT world, as well as our service updates and events check out Twitter feed!

Authentise Now Leader in Additive Manufacturing Data Connectivity

Data being used to reduce cost and scale additive manufacturing to production

 

Sandy, UT; 14 Nov 2017 – Authentise, a leader in process automation software for additive manufacturing, today announced that it has connected to and receives data from more additive manufacturing device types than any other software developers.

Authentise has worked with a number of additive manufacturing equipment providers, such as EOS or the recently announced partnership with SLM, to connect their devices to the Authentise 3Diax platform and Manufacturing Execution System (MES). Data can now be received from ARCAM, 3D Systems, EOS, SLM, Stratasys, and HP additive manufacturing devices, among others, with more to come.

The information provided by them is used to automate actions through Authentise MES. Examples of these actions include automatic order updates, in-depth traceability report creation or the training of machine learning models that can, for example, improve the accuracy of cost, time and maintenance
estimates. This reduces cost, improves reliability and increases output.

The machine data is also available independently through the Machine Analytics Module of the Authentise 3Diax platform. The Module allows users of additive manufacturing technology to create and use their own additive manufacturing automation workflows or to tie the data back into existing IT systems such as Enterprise Resource Planning (ERP) tools. Machine and software suppliers may also use the Machine Analytics Module to create and distribute their own Industry 4.0 solutions.

“In many ways additive manufacturing is not taking advantage of its digital opportunity” says Andre Wegner, CEO of Authentise. “We’re the first to use data to really scale up and take cost out of the process. In doing so we’re also providing a test bed for all of digital manufacturing as we’re going beyond predictive maintenance and analytics to enable immediate automation based on data. That drives nearly immediate return on investment of our customers.”

***

additional information overleaf
To find out more about the 3Diax modules, please visit www.authentise.com/modules.html

About Authentise: Authentise delivers software that enables the production-scale deployment of additive manufacturing. Its landmark products include the 3Diax modular platform as well as the Authentise Manufacturing Execution System. These tools use device data to solve discrete automation challenges and provide an avenue to fully automated order execution and tracking in additive manufacturing, reducing Total Cost of Ownership and speeding up product delivery. The company was founded in Silicon Valley in 2012 and has been covered by Bloomberg, the BBC, Wired, and others.

Find out more at www.authentise.com and follow on Twitter @authentise.

Media:
3DIAX Logo (Square, Horizontal)
Authentise Logo

Contact:
Andre Wegner
+16506918615
info@authentise.com

“ARCAM”, “3D Systems”, “EOS”, “SLM”, “Stratasys” and “HP” Brands and Trademarks are copyrights of their respective owners.

Counterfeiting within the new digital thread (Authentise Weekly News-In-Review – Week 47)

The augmented possibilities of 3D printing within the manufacturing industry hide new kinds of threats and dangers which should be confronted seriously. The nature of the new digital thread being formed within industrial businesses worldwide is such that new avenues of malicious interventions, theft or even sabotage become decentralized and digitized. CAD files can be corrupted remotely and invisibly; Intellectual Property (IP) can be stolen directly or be accessed by digitizing (3D scanning) physical assets; 3D printers’ firmware and control sensors can be compromised to alter the printing results invisibly to the human eye. Counterfeiting is high on the list of perils. The international community is moving to secure AM processes by installing safe practices within the thread. Authentise has very recently announced a partnership with Prototech to enable automatic watermarking of printed objects. New roads of securing 3D printed object are being explored, like leaving chemical signatures that are only readable through X-rays.

3D printing presents cyber security risks for aircraft manufacturers, says Atlantic Council report

The Atlantic Council, a Washington, D.C. think-tank has released a new report which outlines the benefits and risks of 3D printing within the aviation sector. The report is entitled “Aviation Security: Finding Lift, Minimizing Drag.” […] According to the report, additive manufacturing opens up the possibility for three main kinds of cyberattacks: deny, which consists of the disruption of deletion of firmware, software, and product designs; compromise, which is the theft of intellectual property and product design files; and sabotage, which refers to “undetected modification” of printing files with the intention of weakening parts and corrupting their functions.

Write the full report here.

ProtoTech Solutions and Authentise Enable Automatic Watermarks For 3D Printing

Authentise, a leader in process automation software for additive manufacturing, today announced that it has partnered with ProtoTech Solutions, a niche software development company in the CAD/CAM/CAE, 3D visualization and data interoperability domain, to help 3Diax customers automatically embed watermarks such as serial numbers into digital designs. This enables more efficient and reliable tracking and sorting of parts within factories. It also has the potential to significantly speed up the supply chain and reduce the number of counterfeit parts in circulation.

Check out the full press release here.

Chemical Ghost Signature Protect DED 3D Printed Parts From Counterfeiting

DED 3D printed titanium samples with varying taggant depths used in the InfraTrac study. Photo via 3D Printing and Additive Manufacturing journal.

The solution proposed by Dr. Sharon Flank et al. from InfraTrac, is to add spectral signatures to the 3D printed parts that can only be read via x-ray. This technique is more cost effective than some of the other methods of experimentation as it can be conducted using off-the-shelf devices. […] In InfraTrac’s study, an Optomec M7 LENS system is used to 3D print titanium alloy samples. Chemical taggants are added to the parts at different depths, and scanned using x-ray fluorescence (XRF) spectroscopy analysis in lab conditions.

Read the full article here.

 

If you wish to be kept updated on a daily basis on movements in the AM/IIoT world, as well as our service updates and events check out Twitter feed!

We’ll be at Formnext 2017 between the 14th-17th of November! Come check us out at booth Booth # 3.1-A33.

SLM Solutions: Cooperation agreement signed with Authentise Inc.

  • Cooperation aims to integrate real-time production data from SLM Solutions machines into Authentise’s 3Diax software platform
  • Integration enables SLM Solutions customers to evaluate real-time production data to automate process flows
  • Capability to analyze real-time production data especially important in series manufacturing

 

Lübeck, 09 November 2017 – SLM Solutions Group AG (“SLM Solutions”), a leading supplier of metal-based additive manufacturing technology, has recently signed a cooperation agreement with Authentise Inc. (“Authentise”). Authentise is a leading US-based provider of software to automate additive manufacturing processes. Software developed by Authentise helps SLM Solutions customers expand additive manufacturing capacities through greater efficiency, transparency and quality in deploying SLM machines.

Henner Schöne4582_schoeneborn.0041born, member of the Management Board of SLM Solutions Group AG: “We’re very pleased with this partnership with Authentise, as it represents an expansion of our existing Industry 4.0 initiatives and solutions. This collaboration enables our customers to access real-time production data from SLM machines – a capability that’s enormously important especially for customers that deploy our machines for series manufacturing of components. With this partnership, we’re taking an important step towards the fully automated processing of orders on our machines. Authentise supplements our Additive Hub design software that we developed in-house.”

 

07c513d9-834b-4970-a537-59593dc316d7Andre Wegner, Authentise CEO, adds: “This partnership with SLM is an important step to completing the digital thread in additive manufacturing. The direct data access to SLM machines that has now been enabled can be combined with other functionalities of our 3Diax software modules to automate manual tasks. It is possible, for example, to automatically update an order status, or generate documentation that enables finished components to be traced back to source. Our 3Diax platform utilizes data in the sense of a self-learning system. The partnership also makes it easier to integrate SLM machines into SLM Solutions’ customers’ IT systems, and facilitates the transparent analysis of production data through the 3Diax Machine Analytics module. The partnership with SLM Solutions  – a leading supplier of metal-based additive manufacturing technology – is so important because  together can we expand the use of additive manufacturing machines in series production.”

About the companies:

SLM Solutions Group AG

Lübeck-based SLM Solutions Group AG is a leading provider of metal-based additive manufacturing technology. The company’s shares are traded in the Prime Standard of the Frankfurt Stock Exchange. The stock has been listed in the TecDAX index since March 21, 2016. SLM Solutions focuses on the development, assembly and sale of machines and integrated system solutions in the field of selective laser melting. SLM Solutions currently employs over 360 members of staff in Germany, the USA, Singapore, Russia, India and China. The products are utilised worldwide by customers in particular from the aerospace, energy, healthcare and automotive industries.  

Authentise Inc.

Authentise Inc. offers software solutions facilitating the deployment of additive manufacturing in production environments. The solutions it offers include the 3Diax Modular Platform as well as the Authentise Manufacturing Execution System (MES). The MES utilizes data from additive manufacturing machines to resolve automation challenges, creating a path to fully automated order processing and tracking. 3Diax modules also provide the flexibility to easily adapt such automation to existing work processes and integrate it into already existent IT systems. The software products enable total production costs to be reduced and customers’ product launch times to be accelerated. Authentise Inc. was founded in 2012 in Silicon Valley and is also represented in Europe.

 

Contact:

Georg Grießmann, cometis AG

Unter den Eichen 7, 65195 Wiesbaden

Telephone: +49 (0) 611-205855-61

E-Mail: griessmann@cometis.de

ProtoTech Solutions and Authentise Enable Automatic Watermarks For 3D Printing

New 3Diax Module to help drive additive manufacturing to production scale.

Serialisation

Sandy, UT and Pune, India; Oct 31 2017 – Authentise, a leader in process automation software for additive manufacturing, today announced that it has partnered with ProtoTech Solutions, a niche software development company in the CAD/CAM/CAE, 3D visualization and data interoperability domain, to help 3Diax customers automatically embed watermarks such as serial numbers into digital designs.

As part of the agreement, ProtoTech will exclusively offer its watermarking technology through the 3Diax platform and Authentise will market the technology as the 3Diax Watermarking Module. The Module enables serial numbers, barcodes or other identifiers to be embedded at any point in the geometry – on the part, in the support structures, on an attached tag, and even below the surface so that it can only be detected by X-Ray or similar technologies. This enables more efficient and reliable tracking and sorting of parts within factories. It also has the potential to significantly speed up supply chain and reduce the number of counterfeit parts in circulation.

The combination with other 3Diax modules, such as the geometric search module, makes the tool even more powerful. As a result, geometries could be marked even if they are not identical by identifying the similarity of incoming objects to existing templates.

337f81e“We understand geometries and what it takes to change them on the fly” says Varun Bhartiya, Partner at ProtoTech Solutions. “The 3Diax infrastructure is the best way for subject matter experts like us to contribute to badly needed workflow automation in the additive manufacturing sector. Using AM’s unique ability to make differentiated designs at no additional cost our modules can be used to eliminate costly secondary processes such as laser-engraving. This is the first step in our partnership with Authentise to make additive manufacturing more efficient and turn it into a production alternative.”

07c513d9-834b-4970-a537-59593dc316d7“As all Modules on the 3Diax platform, Watermarking works ‘behind-the- hood’”, says Andre Wegner, CEO of Authentise. “This means the actions happen automatically, without the need for manual operator interactions, which saves our clients time and enables them to scale. The modular structure of the platform and the API access also enables us to integrate this module with others, or directly into corporate IT systems. We’re delighted to work with CAD software professionals such as ProtoTech to extend the platform”

***

To find out more about the 3Diax modules, please visit www.authentise.com/modules.html

About ProtoTech Solutions: ProtoTech Solutions is a niche software development services provider in the domain of CAD/CAM/CAE, 3D visualization and data interoperability. The company was found in 2005 and have been helping global organizations achieve their time-to- market and business goals by developing 3D custom applications, CAD Plugins, 3D Mobile apps, 3D web apps, 3D PDF exporters, file exporters/importers, and host of mission-critical engineering application projects.

Find out more at www.prototechsolutions.com and follow on Twitter @ProtoTechSoln.
About Authentise: Authentise delivers software that enables the production-scale deployment of additive manufacturing. Its landmark products include the 3Diax modular platform as well as the Authentise Manufacturing Execution System. These tools use device data to solve discrete automation challenges and provide an avenue to fully automated order execution and tracking in additive manufacturing, reducing Total Cost of Ownership and speeding up product delivery. The company was founded in Silicon Valley in 2012 and has been covered by Bloomberg, the BBC, Wired, and others.

Find out more at www.authentise.com and follow on Twitter @authentise.

Media:

3DIAX Logo (Square, Horizontal)
Authentise Logo
Images of Serialisation: 1, 2, 3 (Caption: Serial numbers can be automatically implanted at a specific or general area of the part with the 3Diax Watermarking Module. Combined with the 3Diax Geometric Search Module, the new tool can extend beyond identical parts and implant a range of similar components.)
Image of Steganography (Caption: The 3Diax Watermarking Module can also enable non-human readable codes to be implanted into geometries. All watermarks can be implanted on tags, in support structures or on the surface or internal to the original object.)

Contact:

Andre Wegner
+16506918615
info@authentise.com